LeafBlaster Pro

There were repairs to attach 2 gutter brackets to rear side of house noted on the repair sheet. The workers were not aware of this and would have not completed the repair if I was not on site. I was able to inform them of this and LeafBlaster Pro completed the repair at that time. They also did not test the gutters for proper drainage until I requested it. I would not feel confident on the installation if I was not on site. They were to quick to rush through the job. Only the foreman spoke English and he left the job after 10 minutes. It was his responsibility to inform the workers of all repairs to be done and confirm a proper installation not me as the customer. As I said earlier if I was not on site to confirm repairs and testing of drainage it would have not been done. The work seems to have been installed properly other than that.

We are very pleased with "Gutter Guards". The screen is extra fine and does not allow needles or leaves to enter the gutter, I look forward to not crawling on the roof to clean gutters three or five times a year. It was easy to install with easy to understand instructions. I am going to purchase more for my rental houses.

WeatherGuard is just installing these and I have not yet see how effective LeafBlaster Pro are. However, I rated the LeafBlaster Pro gutter guards a "4" because they look extremely well engineered and built. Also, I appreciate the Leaf Blaster representative working with Conor Schassler of WeatherGuard to insure proper installation.

I had Leaf Blaster installed by AA Gutters in 2011. After having several problems with debris getting in the gutters & the product sagging and after having gutter access doors installed in my screen enclosure I was able to find the problem. The original gutter guards were only 5.5" wide. The last time AA Gutters came out, LeafBlaster Pro brought 7" wide pieces which fit under the shingle edge & works as expected. Now I have to have the old pieces replaced & AA Gutters say the new pieces were what they originally installed - which is obviously not true as anyone looking can tell.

Steve Pender, Eavestrough LLC, installed my LeafBlaster guards on July 9/10,2021. On both days, about twenty minutes after he left, we had about a forty-five minute "gully washer." Rather than watching the typical waterfall that would come over the length f my front porch gutter, I saw nothing! Sure, cleaning out the gutters helped, but the guards seem to control the flow, directing the water down into the gutters where it should be. I feel confident that LeafBlaster will keep my gutters free of debris and enhance their effectiveness for years to come.

Large Oak trees surround our neighborhood and gutters here in northern Virginia often are clogged with leaves and branches. I put the Leafblaster Pro gutter guards on the front of the house last year and saw an immediate improvement. Now, I put a second set on the back gutters. I'd rather take care of gutters now, then have water back into the roof and eventually walls and have a much bigger problem to fix. I'm a fan.

I have had LeafBlaster Pro installed for about a month. It is an outstanding product and does a great job keeping out leafs, pine needles, and roof material. It has rained a couple of times and the guards remain free of debris and the gutters empty the water. NO MORE CLEANING out the pine needle straw and leafs. In the front I have bigger leaves and have installed regular LeafBlaster. It has been also doing an outstanding job keeping out the large Sycamore leaves from all three of my neighbors trees. LeafBlaster Pro are their trees, but I have tolerate their leaves. What a mess. But NOW, none of them fall in my gutters. If I could only stop them from landing in my front yard all would be perfect.

LeafBlaster Pro is an excellent gutter guard and I would highly recommend it to anyone needing guards. And it is a awesome product to stop all debris, especially the pine needles, since I have about a half acre of them behind my back yard fence.

But and have LeafBlaster Pro installed. Trust me; you'll NEVER regret it

I had a plastic product before the LeafBlaster Pro installation, and had continuing problems with the weight of the leaves overwhelming the product and filling the gutters. This product has definitely stopped that issue. While I will still have to blow my roof off, the gutters are clean and the water flows as it should.

These are really well built and will save our new roof and gutter system from any sort of damage in the future from leafs, needles and grit that had accumulated in those areas in the past. This is the last roof and gutter system we will have to put on our home, so will enjoy 40 years of the comfort of knowing that this system will last!

I don't know how LeafBlaster Pro work untill it rains but pleased with the work the contractor did. 2 Men Got here at 9:30 and fiinished at 4:30. Very professional. Only problem was the supplier where the product was ordered from, I think it was ABC supplies out of Ohio, there was a problem getting the color right on the gutters for me and at least 3 other customers. We were told 3 weeks on 3/11 and it took into the 6th week 4/19 to get it and installed today. But overall happy.

Horn's Gutter Service installed your Leafbuster Pro on our hme on September 3,2019. The gutter cover we had did not keep out pine needles. Your sysrem apparently works as we noe see more needles on the ground.

It is nice to have gutters that can handle rain and snow and I suspect yoir special would would help. We look forward to receiving it.

Thabk you, Bil Patheal

Elija and his partner were extremely efficient, courteous and focused putting the gutter guards on my home. Time will tell me how good this product is but I believe I will not be disappointed. I cannot even see them at my roof line. Everything is very even and neat looking. LeafBlaster Pro also cleaned my gutters beautifully! I am very pleased with this company and will recommend them anytime I have the opportunity.

I was extremely pleased with the quality if the LeafBlasterPro and its construction and
The materials used.
I did find, however, that the installation guides and videos did not reflect
What was required to install the product.

To cut full width I used a circular saw with a diamond cutting blade in my home shop
With the mesh clamped. This gave a clean and consistent cut.

To cut the mesh and the metal sides off for outside and inside corners I used a Dremel tool.
This required doing the cutting in my shop but gave clean and consistent cuts

Also, I had different slopes and gutter sizes so each section had different fabrication requirements. Also I have no idea how this product can be installed on a ladder or from on a roof working backwards. I used both 5" and 6" width products

I also set up a bending bench when I needed to bend the mesh which gave a uniform bending angle.

I used a scaffold to install all of the LeafBlasterPro, which is the safest way to install this product.

I also used a caulk sealant between each section.

I had bought a sample of your Gutterglove product but determined that this would be a very difficult retrofit product to use and would only use it on new construction when it can be installed over an ice shield and before the first course of shingles installed.

So I used a very slow installation process but the final product was perfection.

Thanks for making a great product.

Cordially

Robert Cascone

Living in an area that has lots of trees is a beautiful experience. A challenge that has no easy response is how to clean the gutters around the house.
With gutter blaster most of this concern is, Problem Solved. While there maybe some minor issues with pine needles the real concern is bo concern at all.
There is an added benefit. That is our property value has increased because of the up grade and decreased maintenance concern.

It was a nightmare because the installer said LeafBlaster Pro knew how to install the products but they really didn't. I don't think mine was properly installed and now with having a two story gone it's something I can really check myself. Don't get me wrong the installer was very nice and professional but they should of been trained on your product, I don't thing your product should be sold to a contractor unless they've been properly trained on it.

We have only just had these gutter guards installed, so I can't say with any credibility how LeafBlaster Pro will work. However, they look very solid and rigid - much better than what we had before. The look after the work was completed was fantastic! It also rained yesterday and the gutters worked great! Downspouts were pushing out the water, so it was definitely coming through the guards. Very satisfied so far.

Last week we had the Leaf Blaster gutter guards installed by Flo Rite seamless Gutters in Myrtle Beach. We were very pleased with the workmanship and the professionalism displayed on the job. Our main concern was keeping the pine needles out of the gutters.
Looking forward to receiving the brush so that between the brush and the guards we will be pine needle free! Thanks!,

Leafblaster was just installed last week, however, prior to the installation, the downspouts were stopped up and rain was pouring into our crawlspace. We had a major storm last night and today and we are not having any problems now. We previously had to have someone clean out our gutters every year. Hopefully we won't have that expense anymore.

We have a large Live Oak overhanging a large area of our roof, including a long valley that will collect the majority of the these small leaves that have fallen. We must clean the gutter/screen at the bottom of this valley, but it has been between these cleanings where these screens impress! There was approx 1" of leaves on the screen (below the valley) just prior to the rain. The deck just had the leaf blower put to it and was clear. Started raining, then a down pour. A rush of water came down this valley, blew out the leaves while staying in the gutter. Stood there and watched. Could not ask for more. Pricey, but the REAL DEAL!

The screens have only been installed for several weeks and we had our first storm. The only issue during the down pour is with a section that has 2nd story down spot the funnels into to the porch gutter. The screen could not take in all the gushing water fast enough and the water ran over the leafblaster screen and not into the new 6" gutter. This created a lot of water on the ground below.